Teo Tipper 1500 HDK

The Teo Tipper is an hydraulic box tipper that will handle any box size up to 1500 kg and 160 cm width, without any kind of adjustments. Boxes can be tipped 180 degrees to either side and held in the required position. An hydraulic side grip is holding the box (on the two inner side corners) thus leaving a full opening for emptying.

The Teo Tipper requires only one double acting hydraulic outlet on the tractor/forklift. An electric operated shuttle valve is used for operating the side grip cylinders, that holds the box firmly before and under tipping. The side grips are secured by a hold valve and safety switch, making it possible to release the box while being tipped.

The fork arms can easily be slided sidewise to fit Euro-pallets and various boxes. Each fork arm has underneath a hardened wear plate that prolongs the lifetime of the arm when in heavy use on concrete floors.

The side grips swing backwards as the tipper gets in touch with the box. This makes it possible to remove a single row of boxes in a store, even if the rows of boxes are stacked close together. The side grips automaticly reverts to the forward position when engaged for gripping.

Connection to tractor / forklift
  • The same mounting brackets are used for forklifts (with 1000-2500 kg lifting capasity) as for the Trima and Kjällvefront-end loaders.
  • Separate brackets is available for the Ålö Quicke front-end loaders.
  • Other types can be ordered specially.
  • If the tractor / forklift dose not have a double-action hydraulic outlet, a shuttle valve can be fitted to the tractor’s bucket cylinder or the forklift’s tilt cylinder.
Teo Tipper 1500 HDK

Spesifications:

Technical specifications
Max. tipping load 1 500 kg
Max. transport load 1 500 kg
Specific weight incl. equipment 300 kg
Fork lengths (standard/optional) 93/103 cm
Max. distance between forks (outside edges) 100 cm
Min. distance between forks (outside edges) 50 cm
Max. turning both directions 180º
Max. box width 160 cm
Min. box width 110 cm
Tipper width with wide grips in inner pos. 110 cm
Height 73 cm
Length including forks 130 cm
Length excluding forks 38 cm
Torque at oil pressure 195 bar appr. 275 kpm
Max. oil pressure (safety factor 4:1) 225 bar
Power load shuttle valve (12 VDC) 3,5 A
Item no. Equipment
64-03 Switch, including set of cables
64-05 Flexible cable
64-06 Grey junction box
64-10 Mounting brackets forklift, Trima, Bergsjø, Kjællve and HMV
64-11 Mounting brackets for Euro
64-12 Mounting brackets for Ålø Quicke (type 3)
64-13 Mounting brackets for Triangelkopling (Accord)
64-20 Shuttle valve 12 volts (standard)
64-21 Shuttle valve 24 volts
64-22 Shuttle valve 48 volts
64-30 2 x hydraulic hoses, 1,5 m, 1/4’’ with ISO coupling in both ends
64-31 2 x hydraulic hoses, 6,5 m, 1/4’’ with ISO coupling in both ends
64-107 Compact fork, long type. 103 cm

64-01:

Teo Tipper 1500 HDK for tractor and forklift. Includes 64-03, 64-20 and mounting brackets 64-10. Mounting brackets 64-11, 64-12 and 64-13 are options. Please state item no. when ordering

Hydraulic hoses must also be specified

For forklifts with triple mast, 64-05 and 64-06 must also be ordered.